Scrap and loose material
Orange-peel and scrap grabs
Multi-tine PLY grabs for handling loose, irregular materials. The range includes different capacities and tine arrangements for differing duties.
Explore scrap grabsHydraulic grabs
Hydraulic grabs for material handling applications
Explore I.C.M scrap, orange-peel, clamshell and log grabs, with practical help matching the attachment, rotator and hydraulic requirements to the material and duty.
Choose by application
Start with the material you need to handle
The right route depends on the material, required load or volume, operating geometry and the machine or crane carrying the grab.
Bulk material
Clamshell grabs
Two-shell CLA grabs for bulk-material duties, with closed- and open-side variants represented in the current range.
Explore clamshell grabs
Timber handling
Log grabs
GRA grabs for timber-handling applications. We will confirm the current model and finger arrangement against the intended load and duty.
Explore log grabsCore availability
Common starting models at a glance
These are the I.C.M grab models we commonly stock. The figures below are catalogue orientation data; we confirm the model and current availability for every enquiry.
| Model | Configuration | Capacity / area | Maximum load | Grab mass | Maximum pressure |
|---|---|---|---|---|---|
| Orange-peel and scrap grabs | |||||
| PLY 100/4 | 4 tines | 100 L | 1,000 kg | 95 kg | 250 bar |
| PLY 130/4 | 4 tines | 130 L | 1,500 kg | 115 kg | 250 bar |
| PLY 130/5 | 5 tines | 130 L | 1,500 kg | 130 kg | 250 bar |
| Clamshell grabs | |||||
| CLA-L 126 | Closed sides | 110 L | 220 kg | 168 kg | 250 bar |
| CLA-MR 126 | Open sides | 110 L | 220 kg | 155 kg | 250 bar |
| CLA-L 206 | Closed sides | 180 L | 360 kg | 192 kg | 250 bar |
| CLA-MR 206 | Open sides | 180 L | 360 kg | 179 kg | 250 bar |
| Log grabs | |||||
| GRA-L 17 | Closed fingers | 0.17 m² | 1,500 kg | 73 kg | 250 bar |
| GRA-R 17 | Open fingers | 0.17 m² | 1,500 kg | 77 kg | 250 bar |
On smaller screens, swipe across the table to view every specification.
Commonly stocked does not guarantee immediate availability. Ask us to confirm the model, current stock position and delivery route for your application.
Selection support
A grab is specified as part of a system
Capacity alone does not determine suitability. We review the attachment alongside the material, supporting machine and hydraulic system.
Material and duty
Tell us what will be handled, its approximate density or form, the operating environment and expected duty cycle.
Load and geometry
Required load or volume, opening, grab mass and working geometry all affect which family and size should be considered.
Carrier and hydraulics
We check the crane or carrier, connection arrangement, available pressure and flow, and whether rotation is required.
Rotator options
Match the grab and rotator together
A hydraulic rotator may be specified with the grab where controlled positioning is required. The appropriate model depends on the attachment, permitted loads, flow and complete suspension arrangement.
- Grab-to-rotator recommendation
- Static and dynamic load requirements
- Oil flow and connection requirements
- Suspension or linking arrangement
What to send us
Enough information for a useful first conversation
You do not need to arrive with a finished specification. A short description of the job is usually the best place to start.
- Material and approximate piece size or density
- Required load, volume or throughput
- Crane, excavator or carrier details
- Available hydraulic pressure and flow, if known
- Photos, drawings or an existing grab reference
Beyond the core range
Access the wider I.C.M grab catalogue
Larger sizes and additional attachment families can be supplied to order when the common starting range does not suit the application.
Sorting and demolition grabs
SG sorting and DG demolition ranges cover a broad span of catalogue carrier classes. We will identify the appropriate route from the machine and duty.
Larger and alternative grab configurations
The wider catalogue includes larger clamshell, log, rigid-log, orange-peel and waste-handling configurations, subject to current model verification and availability.
The wider log-grab series is being reconciled against current supplier information. We will confirm the live model designation rather than substitute a legacy reference.
Talk to us
Let’s specify the grab around the job
Tell us what you need to handle and what it is going onto. We can then recommend the grab family, size and relevant rotator route.
Hydraulic grabs
Hydraulic grabs for material handling applications
Explore I.C.M scrap, orange-peel, clamshell and log grabs, with practical help matching the attachment, rotator and hydraulic requirements to the material and duty.
Choose by application
Start with the material you need to handle
The right route depends on the material, required load or volume, operating geometry and the machine or crane carrying the grab.
Scrap and loose material
Orange-peel and scrap grabs
Multi-tine PLY grabs for handling loose, irregular materials. The range includes different capacities and tine arrangements for differing duties.
Explore scrap grabsBulk material
Clamshell grabs
Two-shell CLA grabs for bulk-material duties, with closed- and open-side variants represented in the current range.
Explore clamshell grabsTimber handling
Log grabs
GRA grabs for timber-handling applications. We will confirm the current model and finger arrangement against the intended load and duty.
Explore log grabsCore availability
Common starting models at a glance
These are the I.C.M grab models we commonly stock. The figures below are catalogue orientation data; we confirm the model and current availability for every enquiry.
| Model | Configuration | Capacity / area | Maximum load | Grab mass | Maximum pressure |
|---|---|---|---|---|---|
| Orange-peel and scrap grabs | |||||
| PLY 100/4 | 4 tines | 100 L | 1,000 kg | 95 kg | 250 bar |
| PLY 130/4 | 4 tines | 130 L | 1,500 kg | 115 kg | 250 bar |
| PLY 130/5 | 5 tines | 130 L | 1,500 kg | 130 kg | 250 bar |
| Clamshell grabs | |||||
| CLA-L 126 | Closed sides | 110 L | 220 kg | 168 kg | 250 bar |
| CLA-MR 126 | Open sides | 110 L | 220 kg | 155 kg | 250 bar |
| CLA-L 206 | Closed sides | 180 L | 360 kg | 192 kg | 250 bar |
| CLA-MR 206 | Open sides | 180 L | 360 kg | 179 kg | 250 bar |
| Log grabs | |||||
| GRA-L 17 | Closed fingers | 0.17 m² | 1,500 kg | 73 kg | 250 bar |
| GRA-R 17 | Open fingers | 0.17 m² | 1,500 kg | 77 kg | 250 bar |
On smaller screens, swipe across the table to view every specification.
Commonly stocked does not guarantee immediate availability. Ask us to confirm the model, current stock position and delivery route for your application.
Selection support
A grab is specified as part of a system
Capacity alone does not determine suitability. We review the attachment alongside the material, supporting machine and hydraulic system.
Material and duty
Tell us what will be handled, its approximate density or form, the operating environment and expected duty cycle.
Load and geometry
Required load or volume, opening, grab mass and working geometry all affect which family and size should be considered.
Carrier and hydraulics
We check the crane or carrier, connection arrangement, available pressure and flow, and whether rotation is required.
Rotator options
Match the grab and rotator together
A hydraulic rotator may be specified with the grab where controlled positioning is required. The appropriate model depends on the attachment, permitted loads, flow and complete suspension arrangement.
- Grab-to-rotator recommendation
- Static and dynamic load requirements
- Oil flow and connection requirements
- Suspension or linking arrangement
What to send us
Enough information for a useful first conversation
You do not need to arrive with a finished specification. A short description of the job is usually the best place to start.
- Material and approximate piece size or density
- Required load, volume or throughput
- Crane, excavator or carrier details
- Available hydraulic pressure and flow, if known
- Photos, drawings or an existing grab reference
Beyond the core range
Access the wider I.C.M grab catalogue
Larger sizes and additional attachment families can be supplied to order when the common starting range does not suit the application.
Sorting and demolition grabs
SG sorting and DG demolition ranges cover a broad span of catalogue carrier classes. We will identify the appropriate route from the machine and duty.
Larger and alternative grab configurations
The wider catalogue includes larger clamshell, log, rigid-log, orange-peel and waste-handling configurations, subject to current model verification and availability.
The wider log-grab series is being reconciled against current supplier information. We will confirm the live model designation rather than substitute a legacy reference.
Talk to us
Let’s specify the grab around the job
Tell us what you need to handle and what it is going onto. We can then recommend the grab family, size and relevant rotator route.